Welcome to Loop X Systems and designs.
Creative loop switching applications,
for players who want more from their pedal board.
421 Pedal
A complete analog instrument switching pedal for
live change overs and for swicthing instrumnet routing into a looper pedal.
2B Pedal
A dual loop switcher with an A/B output..
2Xflr Pedal
Dual loop pedal based footswitcher.
With Dual mode.
Loop 5Xmc
Remote controlled signal switching and it is a power supply.
Access yuour favorite effect pedals by remote control.
Loop 5X
Complete expanded control over the amp effect loop and instrument switching.
3 new pedals for 2013
The latest signal switchers from Loop X Systems.
Loop X Systems - Control your effect pedals with loop switching,
A/B inputs / outputs, and our products are regulated 9Volt power supplies.
Our newest pedals are easy to use and feature 2 applications per pedal.
We feature remote control switchers in 2 and 5 loops for the
Person who would like to access the amplifier FX via remote control.
All components are recyclable and follow ROHS standards.
Our unique circuit design is pop free and click free,
we use no audio buffers. 100% analog. The tone is your own.
Loop systems are direct bypass. When all loop circuits are off
instrument signal goes direct to the amplifier.
This is total removal of the effect or pedal board from the instrument signal path.
When pedals are each linked by a 15cm (6") cable,and then onto
the amp by a 10m (30') cable, and the instrument cables at 3m (10').
"If" all the pedals have "true bypass", and are off,
then the total cable length hanging on the guitar output will be over 15m (45')
This will cause a huge loss of tone and signal level.
Our switchers can cut off up to half of this cable length,
and the need for an extra 9V power supply.
Preserving your tone and your pedal settings.
Using Loop X systems can bring cable length down to under 5m (15')total.
And this also has a great benefit when you use our product in the
amplifier effect loop.In bypass mode the amp signal goes only through
it's own FX loop not through all of your effects, and cables.
