Welcome to Loop X systems. Hand built, road worthy,
remote controlled analog loop switchers and 9V power supplies.
Be spontaneous!! Our program control system allows a player to
move through presets of multiple pedals and still maintain
random access have manual control.

    

Loop X Systems - remotely control effect pedals with loop switching,
A/B inputs / outputs, and our products are regulated 9Volt power supplies.
Program options are all analog. Easy to use easy to change prests.
No midi messages to figure out or program. Our memory buttons on the
5Xmc allow for multiple FX to be turned on at same time under one
footswitch, and switch back to random access mode anytime.
An all in one inclusive package. No need for extra adaptors or
power cable runs making a mess. Never have to run power cables
to the front of the stage. And it keeps your audio path from
ever getting mixed up with power cables, so you never have to
deal with the dreaded "60cycle hum." All components are
recyclable and follow ROHS standards. Our unique circuit design is
pop free and click free, we use no audio buffers. 100% analog.
The tone is your own.


Loop systems are direct bypass.When all loop circuits are off
instrument signal goes direct to the amplifier.
This is total removal of the effect from the instrument signal path.
Take for instance when pedals are each linked by a 15cm (6") cable,and then onto the amp by a 10m (30') cable, and the instrument cables at 3m (10').
"If" all the pedals have "true bypass", and are off,
then the total cable length hanging on the guitar output will be over 15m (45')
This will cause a huge loss of tone and signal level.
Our remote Loop Switcher system will remove well over half of
this cable length, and the need for an external 9V power supply.
Preserving your pedal settings and tone.
Using Loop X systems can bring cable length down to under 5m (15')total.




Please direct all enquiries to Contact